Making Crystal Clear Colloidal Silver Inexpensively 6-16-2020
In the video, we were using 1 – 1/2 cups of Distilled water. Never make your Colloidal Silver with any other water only distilled water. Any other water you are going to create contaminants in your water through electrolysis. Do not use bottled water or reverse osmosis water distilled water only. The recommended strength should be between 10 PPM and 15 PPM.
You can Purchase that Colloidal Silver that is 999% Silver wire or silver rods whatever you call it.
The silver wire or silver rods can be purchased off of eBay or Amazon. When you get the silver wire or silver rods take a propane torch and heat a SMALL PORTION without melting it and check the color of the silver product quality. If for any reason it changes to a gray or a slight brown you have Impurities in the silver material, and do not use it. Even if you purchase it from the same company over and over always do the same check using the propane torch.
During the first two hours, you will have small amounts of accumulation on the positive connector. You need to keep watch and take the rods out of the water and wipe them down removing any deposits forming. If you have any materials settle to the bottom use a Siphoning Process to remove the top portion of the colloidal silver mixture. “Do not” use any paper towel material of any kind to filter out the Colloidal Silver. The Colloidal Silver going through the paper towel changes the electrical charges in the Colloidal Silver. If you want to do an experiment to see what I am talking about putting Fresh Colloidal Silver as is In a small glass and then run a small portion of the Colloidal Silver through the coffee filter of any kind or paper towel and put it in a glass and place the Two Small Samples of Colloidal Silver mixture in the sunlight.
The Colloidal Silver that goes through the paper material will change color and the one that did not go through any paper material will stay crystal-clear. We are sharing our studies for free open-source for everybody to stay healthy. Instead of using a battery, you can find an old AC to output DC 24 Volts power supply lying around in your home or shop 24 Volts 1 amp will work perfectly.
Dosage information For all Colloidal Silver Manufactures and Individuals making it for themselves.
I personally do not take Colloidal Silver every day. I take it occasionally. Think of it as a medicine you do not take all the time.
I challenge anyone to do the Milk test. Purchased two half gallons of milk. Put eight drops of colloidal silver in one 1/2 a gallon of milk open it up and First remove a small amount of exposing the air to the container. Open the other half a gallon of milk a Remove a small portion of milk and close it up again. Put the two in the refrigerator and let it sit past 30 days past its Expiration date. Open the two of them up and share your testimony. Smell and texture.
If your cat will drink the milk with the 8 drops Colloidal Silver in the 1/2 gallon milk way past the expiration date and the other 1/2 gallon of milk without the Colloidal Silver the cat will look at you like what are you trying to do.
Source video. Follow the youtuber for more.
- Making Colloidal Silver
- Making Feminized Cannabis Seeds – Colloidal Silver Method
- #386 Ionic & Colloidal Silver, Definitive Guide To Making
- Fixing a colloidal silver unit and making a slightly dangerous one.
- Colloidal Silver Making Antiseptic in a Teardrop trailer
- Making Colloidal Silver Part 1
- Making Colloidal Silver the Easy Way
- Mainlining for colas – making colloidal silver
- Making Colloidal Silver
- My colloidal silver custom generator. I am making more CS due to COVID-19 Coronavirus
- Making Colloidal Silver From Scratch
- Making Femenized Hemp Seeds With Colloidal Silver
- Making Larger Quantities of Ionic~Colloidal Silver
- Making Feminized Cannabis Seeds with Colloidal Silver – Ep. 01 • Purple Punch, Cookies & More
- Making a Hermie Plant with Colloidal Silver
Last update 2021-01-05. Price and product availability may change.