Colloidal silver is a dietary supplement which can be used as a supplement, but it isn’t approved by the FDA. If you’re using colloidal silver, you might want to know how to dilute it to ensure that you don’t ingest too much.
In this article, we’ll tell you all you need to know about colloidal silver, and how you can dilute it to ingest it safely.
Ideally, you should use colloidal silver with a lower PPM, which means particles per million.
If you have a bottle with a higher PPM, we recommend diluting it with purified water, and not tap water, or the effects will not work.
Using an eyedropper, divide the amount of colloidal silver you have by how much you want to have, and then add that amount of water to your solution.
What Is Colloidal Silver?
Colloidal silver is a supplement which consists of tiny silver particles which are suspended in a liquid base.
It can be used to remedy a wide range of issues, with some people ingesting it, applying it to their skin, or spraying it onto them.
However, it hasn’t been approved by the FDA, so there are no strict guidelines on the dosage used and how much is really needed.
Generally, silver has been used in healing remedies for centuries, dating back to the time of Ancient Greece where a silver coin would be placed in water to remove the bacteria.
In fact, silver was once used as an antimicrobial for wounds.
However, too much colloidal silver can put you in danger of ingesting too many toxic chemicals, so you need to ensure you purchase it from a seller who is transparent about how much silver they use and the manufacturing process.
How Do You Dilute Colloidal Silver?
Diluting colloidal silver works in the same way as you would dilute any other solution. You simply need to add more water to the solution.
Concentrated colloidal silver is usually measured by 500 PPM, 250 PPM, or 100 PPM. Ideally, you should dilute colloidal silver using demineralized water, and not tap water.
It is better to use a lower dilution so that you won’t accidentally turn your skin a blue-gray color with argyria.
Before you measure out your solution, you should understand what PPM is. PPM means parts per million, and how much PPM there is depends on the product.
As colloids are a solution which contain tiny particles suspended in liquid. PPM is the concentration of the silver in the solution.
While usually more is better, that can not be said for colloidal silver. In fact, it is better to dilute it to get the best results, or you may do more harm than good.
There is another meaning of parts per million, which can also be expressed by milligrams per liter.
Higher concentrations of colloidal silver might lead to an increased risk of toxicity, so you should avoid ingesting a larger amount of PPM.
A higher concentration is not actually that useful to your body, so instead, you should use 10 PPM instead. However, it is not as simple as dividing the PPM by 25.
The best way to measure your colloidal silver is by using an eyedropper. Say you have a PPM of 500 for your colloidal silver.
Divide 500 by the number of PPM you want, in this case, it’s 10. Put 1 drop of 500 PPM colloidal silver into a small jug, and add 50 drops from your eyedropper.
We recommend that instead of diluting it, you look for a bottle with a lower PPM to ensure that you have the right amount of colloidal silver that you need to use.
How Much Colloidal Silver Should You Use?
Colloidal silver isn’t approved by the FDA, so there isn’t a recommended dosage. If you want to use colloidal silver, it’s best to discuss it with your medical practitioner.
Generally, how much colloidal silver you use depends on patient-specific factors and what you are using it for. If you do use colloidal silver, you should be careful of how much you use.
If you do have any issues after trying colloidal silver, you should consult a doctor.
Due to the varying concentrations in silver particles used in colloidal silver, it’s difficult to understand how much you should use.
Some products may only have 10 PPM of silver, while others may go as high as 500 PPM. You can usually find colloidal silver as a diet supplement and as a homeopathic product.
Buying a product with a lower PPM is better for you, as it will put you at a lower risk of being affected by any toxic particles.
If you use it for a long time with the incorrect dosage, you may find yourself diagnosed with argyria. This could turn your skin a blue-gray color, or you may find that you are impacted by other issues.
Generally, a lower PPM will prevent this from happening, but if you face any negative side effects from taking it too much, you should contact your doctor.
What Can Colloidal Silver Do?
Colloidal silver is claimed to be able to stimulate the immune system, making it easier for bodies to heal when they’ve been injured.
It’s been said that it can be used to heal any wounds, improve your skin, and treat illnesses such as the flu and more serious illnesses.
Generally, colloidal silver can be used to protect you and fight against any fungi, bacteria, viruses, and inflammation.
Overall, it’s said to be good for your immune system, and can help protect you from any illnesses that may otherwise wear you down.
Of course, there have been known to be some side effects of colloidal silver as well. The most commonly heard of condition is argyria, which turns your skin a blue-gray color.
However, this is more likely to happen through prolonged usage, and if you use too much colloidal silver.
There are a few other side effects that may occur too, such as headaches and fatigue. Each side effect is determined on a case by case basis, so not all side effects will affect you.
However, it’s not recommended that you use colloidal silver while pregnant or breastfeeding, as it may harm your child.
If you do use it, we recommend that you only use colloidal silver in small doses, with a lower PPM to ensure that you don’t ingest useless chemicals that aren’t having a bioactive effect on you.
Final Thoughts
Colloidal silver is to be used at your own risk, and taking it in low doses shouldn’t have a negative impact on your health.
There are numerous health benefits of taking colloidal silver, so long as you don’t ingest a large (Also check out the Benefits And Dosage Of Colloidal Silver And Hair) amount. Always try to buy colloidal silver with a lower PPM, but if you can’t, follow our instructions to dilute it.
Frequently Asked Questions
Can Colloidal Silver Be Used As An Antibiotic?
There have been reports that colloidal silver can reduce the duration and severity of numerous bacterial infections.
What Does Colloidal Silver Do For Your Face?
Colloidal silver will block oxygen from any bacteria on your face, and prevent them from multiplying, thus eliminating them and keeping you from harm.