Everything You Need To Know About Voltage For Your Colloidal Silver Generator

If you’re new to making colloidal silver, it can feel daunting to make your own at home for the first time. That’s why we’ve compiled an article that will tell you everything you need to know about making your own colloidal silver at home.

Everything You Need To Know About Voltage For Your Colloidal Silver Generators (1)

The best way to do this is through a colloidal silver generator, as these also contain a TDS meter (Total Dissolved Solids meter) to discover the PPM (Parts Per Million) of the silver in your pure water.

Ideally, you should use 30 volts, with this being the perfect voltage. Using a lower voltage ensures that you won’t be at risk of getting electrocuted or shocked. That’s because when using a colloidal silver generator, the silver rods are inserted into purified water.

If the voltage is too high, you could be in danger of harming yourself if you make a mistake. Therefore, using a lower voltage keeps you safe, and you’re also not at risk, and it won’t use too much electricity as most generators maintain a consistent function throughout the process. 

What Is Colloidal Silver?

Colloidal silver is a dietary supplement that consists of silver particles that are suspended in purified water. It can be ingested via your mouth (Also check out Colloidal Silver Mouthwash), absorbed into your skin, or sprayed on or into you to treat a variety of health conditions.

It is said that colloidal silver can be used to treat wounds and illnesses. It’s said to be able to heal wounds, improve skin disorders, and help the immune system and protect you from illnesses such as the flu.

However, it’s important to note that colloidal silver shouldn’t be taken in large doses. It’s better to have colloidal silver with a lower PPM (Find out Everything You Need To Know About Colloidal Silver Ppm), as too much could possibly lead to agyria, a condition that turns your skin blue-gray.

However, this doesn’t happen to everyone, and will only happen if you have too high a concentration. Due to this, colloidal silver isn’t approved by the FDA, and anyone who uses it does so at their own risk. 

For many, the health benefits outweigh the cost, which is why many people purchase colloidal silver or use a colloidal silver generator to make their own. 

What Is A Colloidal Silver Generator?

A colloidal silver generator is a machine used to make your own colloidal silver at home.

There are a variety available with different levels of voltage, and many of them include a TDS meter to measure the concentration of silver particles in the water. It’s essential that the silver particles aren’t too big, or there won’t be any major effects. 

Using a colloidal silver generator allows you to have more control over how much you make. These kits can either be bought online, or you can make your own. However, it’s essential that when you make or use one that you use the right equipment.

It’s best to use pure demineralized water, and pure silver. Tap water shouldn’t be used, as it may have a negative effect on the silver, and cause the colloidal silver to not work properly.

How Does A Colloidal Silver Generator Work?

How Does A Colloidal Silver Generator Work

A colloidal silver generator is made of a few different features, with the ingredients including demineralized water and pure silver.

Many kits include 99.9% pure silver, and come with a TDS meter to ensure you know how concentrated the silver in your solution is. Some may also include a water quality indicator to ensure the water is pure.

Typically, the charge is placed on top of a jar, with two rods connected to it. The rods are connected to the charge, where they are then placed into the water. Some versions of a silver colloidal generator may allow them to mix the water better.

The colloidal is produced using the electrolysis process to ensure the silver is ionized, with the speed and price of the generator varying depending on other factors.

Generally, colloidal silver generators include a disclaimer that encourages buyers to research before purchasing them.

They also mention how they are not endorsed by the FDA, and that these generators are used at the risk of each user. This is because if done incorrectly, you may find that the results are more harmful than expected. 

It is essential that you follow the instructions correctly when using the colloidal silver generator. While you don’t need to know everything about making colloidal silver, it is best to follow the instructions in the manual to ensure that you get the best possible results.

If you find that you have any issues after using your colloidal silver generator, we suggest you contact your doctor or any other healthcare professionals as soon as possible. 

Does Voltage Matter?

The voltage is essential for your colloidal silver generator to work properly and safely. 30 volts is seen as the perfect voltage, as it is low enough that it can maintain a steady and consistent current.

However, it is not high enough to put you in danger should you accidentally touch it or come into contact with the silver rods for any reason.

If the voltage is too high, you could put yourself in danger of harm, as the silver rods conduct electricity, and touching them after they were covered in water could electrocute or shock you.

There is also a risk of shorting out the power if you use too high a voltage. Using a low voltage ensures that your generator will continue to work for a longer period of time.

Making colloidal silver can be a time consuming process, so ensuring a low voltage will allow the process to run smoother. It is essential that you don’t use a higher voltage if you think the process will go faster, because it will not. It will only put you in harm’s way.

Choosing the correct voltage can help you make colloidal silver safely, and without any issues. 

Frequently Asked Questions

Does Colloidal Silver Fight Infection?

There have been reports of silver being used to treat burns and other wounds. It has been said to stop bacteria and fungi from growing around your body.

How Long Does Colloidal Silver Stay In Your System?

Colloidal silver stays in your system for roughly one week, depending on how much you have taken. 

Is It Safe To Take Colloidal Minerals?

It may be unsafe to take colloidal minerals by mouth, and it depends on the number of concentrated minerals found in the solution.

Final Thoughts

Colloidal silver isn’t approved by the FDA, but it is a popular diet supplement that can be used in small doses. If you have any issues after using colloidal silver, then you should contact your doctor as soon as possible.

However, generally, if you use colloidal silver in moderation, you shouldn’t be in danger of any side effects that may appear. 

There are benefits of using colloidal silver in moderation, as there are historic reports of silver being used to reduce the amount of bacteria in water.

Silver has also been used to dress wounds, so there are historic uses of silver being used. If you don’t want to make your own colloidal silver, you should purchase some from a reputable seller. 

Carlos Esteban